Gott ráð til að tjunna W124
Innsent: 18 Maí 2010, 16:14
þetta er ódýrt og fljótlegt ráð til að fá smá auka útur w124 bílnum þínum sem var verið að benda mér á
"ill give u a tip to gettin more hp from ur car. At the back of ur engine on the left side (intake side) there is the coolant temp sensor. unplug it splice the harnes to reveal 4 wires that connect to the CTS plug. take a multi meter and find out which of the 4 are grounds.
the wires are arranged in an X layout ie grounds are diagonal. now with the multimeter in continuity test mode check which of the remaining 2 wires feeds the Ignition ECU located on the inside of the left fender. to do that unplug the 2 large round plugs on this EZL ECU and start checking on which of the terminals at the end of the plugs u get the coninuity to one of the wires left on CTS plug.
once located cut the wire where we spliced the harness and reconnect with a resistor of a value of abt 0.7kohm. reconnect all and drive "
vona að þetta komi að einhverjum notum
"ill give u a tip to gettin more hp from ur car. At the back of ur engine on the left side (intake side) there is the coolant temp sensor. unplug it splice the harnes to reveal 4 wires that connect to the CTS plug. take a multi meter and find out which of the 4 are grounds.
the wires are arranged in an X layout ie grounds are diagonal. now with the multimeter in continuity test mode check which of the remaining 2 wires feeds the Ignition ECU located on the inside of the left fender. to do that unplug the 2 large round plugs on this EZL ECU and start checking on which of the terminals at the end of the plugs u get the coninuity to one of the wires left on CTS plug.
once located cut the wire where we spliced the harness and reconnect with a resistor of a value of abt 0.7kohm. reconnect all and drive "
vona að þetta komi að einhverjum notum